RB20, RB25 & Neo Rocker Cover Baffle Kit, Splash plate kit reduce oil in the catch can
RB20, RB25 & Neo Rocker Cover Baffle Kit, Splash plate kit reduce oil in the catch can
RB20, RB25 & Neo Rocker Cover Baffle Kit
Improve oil control inside the rocker covers of your RB20, RB25 or Neo twin-cam engine with this complete baffle and splash plate kit.
The kit is designed to help reduce oil vapour leaving the rocker covers and reduce excess oil reaching the catch can, particularly in higher-performance applications.
Suitable for street, track and drift applications, the kit replaces the factory rocker-cover baffle setup with upgraded baffle plates, splash plates and filter media.
What’s Included
- Pair of new baffle plates
- Pair of long splash plates
- Screws
- Drill bit
- Thread tap
- Blue baffle media
Important: Cam cap studs are required to install the long splash plates and are not included with this kit.
Key Benefits
- Helps reduce oil vapour leaving the rocker covers
- Helps reduce excess oil reaching the catch can
- Long splash plates provide additional oil control
- Suitable for street, track and drift applications
- Designed for RB20, RB25 and Neo twin-cam engines
Installation
Installation requires drilling and tapping the factory rocker covers.
- Remove the stock rivets — drill out the factory rivet retainers using the supplied drill bit.
- Tap the mounting holes — use the supplied thread tap to prepare the mounting points.
- Refit the stock mesh filter — clean and reinstall the factory mesh filter, adding the supplied baffle media between the filter and hose outlets.
- Install the baffle plates — use suitable engine sealant to secure the new baffle plates.
- Install the long splash plates — fit the splash plates using the supplied hardware and required cam cap studs.
- Refit the rocker covers — reinstall and tighten all components correctly.
When replacing cam cap bolts with studs, replace one at a time and torque them to the appropriate Nissan specification.
Engine sealant and thread-locking compound are required for installation.
Cam Cap Stud Requirements
Cam cap studs are required for installation of the long splash plates and are not included with the kit.
Suitable references listed by Boost Doc are:
- Nissan Part #13058-5L700
- Tomei Part #193016
Fitment
- RB20 twin-cam engines
- RB25 twin-cam engines
- RB25 Neo
- Stock or modified rocker covers compatible with this baffle setup
- Cams up to 11.25 mm lift
Note: Long splash plates require cam cap studs as outlined above.
Upgrade your RB rocker-cover oil-control setup with a complete baffle and splash plate kit designed for RB20, RB25 and Neo engines.
Shipping cost is based on weight and destination. Just add products to your cart and use the Shipping Calculator to see the shipping price.
Boost Doc prides itself on customer service, and we want happy customers and will provide a repair, replacement or refund for faulty products.
We will not refund if you simply changed your mind, found it cheaper somewhere else, decided you did not like the purchase or had no use for it.
But you can choose a refund or replacement if an item is found to be faulty.